RFC 1112:Host Extensions for IP Multicasting
RFC-Ref

group address


Click on the red underlined text to get to the source

... HOST GROUP ADDRESSES ...
... In Internet standard "dotted decimal" notation, host group addresses range from 224.0.0.0 to 239.255.255.255. The address ...
... discussion of several issues related to host group addresses. ...


... merely specifies an IP host group address, rather than an individual IP address, as the destination ...
... be extended to recognize IP host group addresses when routing outgoing datagrams ...
... A host group address must never be placed in the source address field or anywhere in a source route ...
... IP datagrams is a procedure for mapping IP host group addresses to Ethernet multicast addresses ...
... An IP host group address is mapped to an Ethernet multicast address ...
... significant bits in an IP host group address, more than one host group address ...
... group address, more than one host group address may map to the same Ethernet multicast address ...
... Ethernet, all IP host group addresses may be mapped to a single local broadcast address ...
... network, all IP host group addresses might be mapped to the well-known local address ...


... Both operations should return immediately (i.e., they are non- blocking operations), indicating success or failure. Either operation may fail due to an invalid group address or interface identifier. JoinHostGroup may fail due to lack of local resources. LeaveHostGroup may fail because the host ...
... datagram with an IP host group address in its source address field is quietly discarded. An ICMP error message ...
... address" is an IP host group address. The JoinLocalGroup operation requests the local network module to accept ...
... IP host group address. The LeaveLocalGroup operation requests the local network module to stop delivering up packets destined to the given IP ...
... IP host group address. The local network module is expected to map the IP ...
... IP host group addresses to local network addresses as required to ...
... host's IP host group addresses. It is highly desirable to take advantage of any address filtering ...


... Checksum | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Group Address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ...
... checksum field is zeroed. Group Address In a Host ...
... In a Host Membership Query message, the group address field is zeroed when sent, ignored when received. ...
... In a Host Membership Report message, the group address field holds the IP host ...
... holds the IP host group address of the group being reported. ...
... destination address equal to the host group address being reported, and with an IP time-to-live ...
... IP host group address in its IP destination field and its IGMP ...
... IP destination field and its IGMP group address field, to ensure that the host's own Report is not cancelled by an ...
... checksum, and contain the same IP host group address in its IP destination ...
... destination field and its IGMP group address field. A Report applies only to the membership in the group identified by the ...


... APPENDIX II. HOST GROUP ADDRESS ISSUES ...
... IP host group addresses. ...
... Group Address Binding ...
... binding of IP host group addresses to physical hosts may be ...
... IP network. An IP host group address is dynamically bound to a set of local network interfaces on a set of IP networks ...
... It is important to understand that an IP host group address is NOT bound to a set of IP unicast addresses ...
... Allocation of Transient Host Group Addresses ...
... This memo does not specify how transient group address are allocated. It is anticipated that different portions of the IP transient host ...
... IP transient host group address space will be allocated using different techniques. For example, there may be a number of servers that can be contacted to acquire a new transient group address ...
... group address space will be allocated using different techniques. For example, there may be a number of servers that can be contacted to acquire a new transient group address. Some higher-level protocols (such as VMTP, specified in RFC-1045exp ...
... IP transient host group addresses, similarly to the way that IP host group addresses ...
... group addresses, similarly to the way that IP host group addresses are mapped to Ethernet multicast addresses ...
... datagrams sent to any host group address will reach only the intended hosts, or that datagrams ...
... tokens. Information transmitted to a host group address should be encrypted or governed by administrative routing ...



Google
Web
RFC-Ref