RFC 3956:Embedding the Rendezvous Point (RP) Addre...
RFC-Ref

group address


Click on the red underlined text to get to the source

... address of the RP is encoded in the IPv6 multicast group address, and specifies a PIM-SM group ...
... o A specification of a subrange of [RFC3306] IPv6 multicast group addresses defined by setting one previously unused bit of the Flags field ...
... Flags field to "1", o a specification of the mapping by which such a group address encodes the RP address ...
... RP address can't be embedded into a 128-bit group address with space left to carry the group identity ...
... multicast addresses is outside the scope of this document; it is up to the RP and applications to ensure that group addresses are unique by using some unspecified method. However, the mechanisms are probably similar to those used with [RFC3306 ...


... RIID=0 is reserved, see section 6.3). However, each of these is an IPv6 group address of its own (i.e., there can be only one RP per multicast address ...


... subnet, e.g., 2001:DB8:BEEF:FEED::/64. In that case, the group addresses would be something like "FF7x:y40:2001:DB8:BEEF:FEED::/96", and then their RP address ...
... administrator selects the least specific part of the unicast prefix, with plen=32, and the group addresses will be from the multicast prefix: ...
... RP address configuration in the scenarios where it is desirable to have the group addresses be consistent with the unicast prefix allocations. ...


... throughout the PIM domain is not necessary, as each group address specifies the RP to be used. ...
... Group) or (S,G) Join by guessing/learning the source and/or the group address. For proper protection, one should set up, for example, PIM multicast ...


... RP mapping must be redone for every new IPv6 group address that would map to a different RP. For efficiency, the results may be cached in an implementation- ...
... 1. A receiver finds out a group address by some means (e.g., SDR or a web page). ...
... 1. A sender finds out a group address by using an unspecified method (e.g., by contacting the administrator ...



Google
Web
RFC-Ref