PIM-SM
Click on the red underlined text to get to the source
... deployment problem
with global, interdomain IPv6 multicast: PIM-SM [PIM-SM] RPs have no
way of communicating the information about (active ...
... IPv6 multicast group address,
and specifies a PIM-SM group-to-RP mapping to use the encoding ...
...
o a description of operational procedures to operate ASM with PIM-SM
on these IPv6 multicast groups ...
... addresses for use by customers, but an organization wants to have its
own PIM-SM domain. The organization can pick multicast addresses
...
...
Interdomain MSDP model for connecting PIM-SM domains is mostly
hierarchical in configuration and deployment ...
... intra-domain cases, the embedded-RP model is
practically identical to the traditional PIM-SM in intra-domain. On
the other hand, PIM-SM ...
... PIM-SM in intra-domain. On
the other hand, PIM-SM has been deployed (in IPv4) in inter-domain
...
... this described briefly in Section 6.1.
The PIM-SM specification states, "Any RP address configured or
...
... Savola, P., Lehtonen, R., and D. Meyer, "PIM-SM Multicast Routing Security Issues and Enhancements", Work in Progress ...
... Fenner, B. et al, "Protocol Independent Multicast - Sparse Mode (PIM-SM): Protocol Specification (Revised)", Work in Progress, July 2004. ...
... that range, in contrast to FF70::/12, as currently specified, being
for PIM-SM only.
Instead of using flags bits ...
... address) as well, for example, what should be the RPT
threshold for PIM-SM. These could be, whether feasible or not,
encoded in the RP address ...