SDH
Click on the red underlined text to get to the source
... networks. When LMP is used with SONET/SDH, however, the fault
management procedures may not be needed as existing SONET/SDH
...
... LMP is used with SONET/SDH, however, the fault
management procedures may not be needed as existing SONET/SDH
mechanisms can be used.
...
... mechanisms can be used.
In this document, the SONET/SDH technology-specific information for
LMP is defined. Specifically, the SONET/SDH ...
... SONET/SDH technology-specific information for
LMP is defined. Specifically, the SONET/SDH test procedures used for
link verification and link property correlation ...
... STM(-N): Synchronous Transport Module (-N) (SDH).
STS(-N): Synchronous Transport Signal-Level N ...
... LSP Encoding Type as
defined in [RFC3471]. For SONET/SDH, this value must equal the value
given for "SDH ITU-T ...
... In the following subsection, the various options for Verify Transport
Mechanism are defined when the encoding is SONET/SDH. The trace
correlation transport mechanism (defined for J0, J1 ...
... 16 bits in length.
In this document, the flags for SONET/SDH encoding are defined. Note
that all values are defined in network byte order ...
... specific technology: for SONET see [T1.105] and for SDH see
[G.707]. The message MUST be padded with zeros to a 32-bit ...